Earthing switch switchgear single conical gear bevel gear
Operating instruction of CL-40.5 bevel gear:
1.CL-40.5 bevel gear used for JN -40.5/31.5 earthing switch manual operation,can be used with KYN -40.5 and other models switchgear.
2.Rotational angle of operating shaft : 270° & 90°(open-close)
3.The bevel gear shown in the chart is right operation,and the left operation is commutation assembled by manufacturer,user could install it symmetrically on the left side according to the chart.
|1.||Used in the switchgear, it can work in the switch both door apparatus.|
|2.||It can match with the JN15 series earthing switch 24kv .|
|3.||Our aim is to provide our customers the best quality in the lowest price .|
|4.||If you have any details ,please feel free to contact us.|
1) The altitude does not exceed 1000m
2) The ambient temperature is between -30°C to +40°C, the daily mean temperature is no greater than 30°C.
3) The daily mean relative temperature is no greater than 95%.The monthly mean relative temperature is no greater than 90%.
4) The installation area should be without the dangerous mediums which affect the conductive propertied and the insulating performance of the products, such as steam ,gas, chemical corrosive deposit, salt spray, dust, dirt, and so on.
5) There should be no frequent vibration and serious jolt.